IS ITALY HIGH PERFORMANCE COMPONENTS

APPLICATION

La gamma di componenti IS-ITALY si suddivide in due categorie distinte per profili DP100 e DP125 che, in applicazione alle quattro
tipologie di guide (G1 – G2 – G3 – G4), generano i seguenti standard, pensati per conferire alle serrande avvolgibili elevate prestazioni, in
conformità ai requisiti della norma armonizzata EN 13241 e del CPR 305/2011.

1

Staffa Guida G2

2

Guida G2

3

Inviti Guide G1 - G2 - G3 - G4

4

Fermastecca

5

Oblò DP100 - DP125

6

Profili coibentati

7

Maniglia

8

Guarnizione a pavimento DP100

9

Gancio Rolling DP100

10

Guarnizione guida

11

Tappo foro passante guida

IS-ITALY DP100 + G2

Insulated profile DP100, produced by profiling from a single strip of steel 5/10 mm or aluminum 6/10 mm and insulated with polyurethane foam with density 70 kg/mc, in compliance with mandatory environmental regulations. The profile has a step of 100 mm and an average thickness of 22.5 mm. It has curls of head and tail shaped like a circle arc to minimize the noise during the winding.

The exterior has a large, stripeless surface, creating a harmonious and innovative design. At the same time, the profile lends itself to compact windings that minimize architrave dimensions. The DP100 normally used for the construction of roller shutters allocated in residential, commercial or industrial buildings where high performance of wind resistance, thermal and acoustic insulation, air and water permeability are required. It is particularly suitable for high speed and high energy efficiency dampers.

1

Staffa Guida G2

2

Guida G2

3

Inviti Guide G1 - G2 - G3 - G4

4

Fermastecca

5

Oblò DP100 - DP125

6

Profili coibentati

7

Maniglia

8

Guarnizione a pavimento DP100

9

Gancio Rolling DP125

10

Guarnizione guida

11

Tappo foro passante guida

IS-ITALY DP125 + G3

Insulated profile DP125, produced by profiling from a single strip of steel 5/10 mm or aluminum 6/10 mm and insulated with polyurethane foam with density 70 kg/mc, in compliance with mandatory environmental regulations.
The profile has a step of 125 mm and an average thickness of 30 mm. It has curls of head and tail shaped like a circle arc to minimize the noise during the winding. The external part has a surface without lines, such as to create a unique design and a smooth wall in the coupling with contiguous profiles.

The DP125 profile is extremely robust and can normally be used for the construction of roller shutters allocated in residential, commercial or industrial buildings where high performance of wind resistance, thermal and acoustic insulation are required, air and water permeability, similar to sectional doors or overhead doors. The large external smooth surface of the DP125 profile allows you to appreciate the design of the new prepainted finishes, making the damper an elegance that meets the most sophisticated customer requests.

Key benefits of IS-ITALY System

design made in Italy

thermal insulation

acoustic insulation

wind resistance

air permeability and water tightness

mechanical strength

IS-ITALY installations

IS-ITALY system: insulated horizontal profiles DP100 and DP125, structural sliding guides and related accessories.

IS Italy: originality, technique and design.